IU Indianapolis ScholarWorks :: Browsing by Author "Wagner, Diane R."

Browsing by Author "Wagner, Diane R."

Now showing 1 - 8 of 8

Deformability of Human Mesenchymal Stem Cells Is Dependent on Vimentin Intermediate Filaments
(Springer, 2017-05) Sharma, Poonam; Bolten, Zachary T.; Wagner, Diane R.; Hsieh, Adam H.; Department of Mechanical Engineering, School of Engineering and Technology
Mesenchymal stem cells (MSCs) are being studied extensively due to their potential as a therapeutic cell source for many load-bearing tissues. Compression of tissues and the subsequent deformation of cells are just one type physical strain MSCs will need to withstand in vivo. Mechanotransduction by MSCs and their mechanical properties are partially controlled by the cytoskeleton, including vimentin intermediate filaments (IFs). Vimentin IF deficiency has been tied to changes in mechanosensing and mechanical properties of cells in some cell types. However, how vimentin IFs contribute to MSC deformability has not been comprehensively studied. Investigating the role of vimentin IFs in MSC mechanosensing and mechanical properties will assist in functional understanding and development of MSC therapies. In this study, we examined vimentin IFs’ contribution to MSCs’ ability to deform under external deformation using RNA interference. Our results indicate that a deficient vimentin IF network decreases the deformability of MSCs, and that this may be caused by the remaining cytoskeletal network compensating for the vimentin IF network alteration. Our observations introduce another piece of information regarding how vimentin IFs are involved in the complex role the cytoskeleton plays in the mechanical properties of cells.
Dysfunctional stem and progenitor cells impair fracture healing with age
(Baishideng Publishing Group, 2019-06-26) Wagner, Diane R.; Karnik, Sonali; Gunderson, Zachary J.; Nielsen, Jeffery J.; Fennimore, Alanna; Promer, Hunter J.; Lowery, Jonathan W.; Loghmani, M. Terry; Low, Philip S.; McKinley, Todd O.; Kacena, Melissa A.; Clauss, Matthias; Li, Jiliang; Orthopaedic Surgery, IU School of Medicine
Successful fracture healing requires the simultaneous regeneration of both the bone and vasculature; mesenchymal stem cells (MSCs) are directed to replace the bone tissue, while endothelial progenitor cells (EPCs) form the new vasculature that supplies blood to the fracture site. In the elderly, the healing process is slowed, partly due to decreased regenerative function of these stem and progenitor cells. MSCs from older individuals are impaired with regard to cell number, proliferative capacity, ability to migrate, and osteochondrogenic differentiation potential. The proliferation, migration and function of EPCs are also compromised with advanced age. Although the reasons for cellular dysfunction with age are complex and multidimensional, reduced expression of growth factors, accumulation of oxidative damage from reactive oxygen species, and altered signaling of the Sirtuin-1 pathway are contributing factors to aging at the cellular level of both MSCs and EPCs. Because of these geriatric-specific issues, effective treatment for fracture repair may require new therapeutic techniques to restore cellular function. Some suggested directions for potential treatments include cellular therapies, pharmacological agents, treatments targeting age-related molecular mechanisms, and physical therapeutics. Advanced age is the primary risk factor for a fracture, due to the low bone mass and inferior bone quality associated with aging; a better understanding of the dysfunctional behavior of the aging cell will provide a foundation for new treatments to decrease healing time and reduce the development of complications during the extended recovery from fracture healing in the elderly.
Ectopic models for endochondral ossification: comparing pellet and alginate bead culture methods
(Wiley, 2017) Weiss-Bilka, Holly E.; McGann, Megan E.; Meagher, Matthew J.; Roeder, Ryan K.; Wagner, Diane R.; Engineering Technology, School of Engineering and Technology
Key aspects of native endochondral bone development and fracture healing can be mimicked in mesenchymal stem cells (MSCs) through standard in vitro chondrogenic induction. Exploiting this phenomenon has recently emerged as an attractive technique to engineer bone tissue, however, relatively little is known about the best conditions for doing so. The objective of the present study was to compare the bone-forming capacity and angiogenic induction of hypertrophic cell constructs containing human adipose-derived stem cells (hASCs) primed for chondrogenesis in two different culture systems: high-density pellets and alginate bead hydrogels. The hASC constructs were subjected to 4 weeks of identical chondrogenic induction in vitro, encapsulated in an agarose carrier, and then implanted subcutaneously in immune-compromised mice for 8 weeks to evaluate their endochondral potential. At the time of implantation, both pellets and beads expressed aggrecan and type II collagen, as well as alkaline phosphatase (ALP) and type X collagen. Interestingly, ASCs in pellets formed a matrix containing higher glycosaminoglycan and collagen contents than that in beads, and ALP activity per cell was higher in pellets. However, after 8 weeks in vivo, pellets and beads induced an equivalent volume of mineralized tissue and a comparable level of vascularization. Although osteocalcin and osteopontin-positive osteogenic tissue and new vascular growth was found within both types of constructs, all appeared to be better distributed throughout the hydrogel beads. The results of this ectopic model indicate that hydrogel culture may be an attractive alternative to cell pellets for bone tissue engineering via the endochondral pathway.
Genipin crosslinking decreases the mechanical wear and biochemical degradation of impacted cartilage in vitro
(Wiley, 2017-03) Bonitsky, Craig M.; McGann, Megan E.; Selep, Michael J.; Ovaert, Timothy C.; Trippel, Stephen B.; Wagner, Diane R.; Department of Engineering Technology, School of Engineering and Technology
High energy trauma to cartilage causes surface fissures and microstructural damage, but the degree to which this damage renders the tissue more susceptible to wear and contributes to the progression of post-traumatic osteoarthritis (PTOA) is unknown. Additionally, no treatments are currently available to strengthen cartilage after joint trauma and to protect the tissue from subsequent degradation and wear. The purposes of this study were to investigate the role of mechanical damage in the degradation and wear of cartilage, to evaluate the effects of impact and subsequent genipin crosslinking on the changes in the viscoelastic parameters of articular cartilage, and to test the hypothesis that genipin crosslinking is an effective treatment to enhance the resistance to biochemical degradation and mechanical wear. Results demonstrate that cartilage stiffness decreases after impact loading, likely due to the formation of fissures and microarchitectural damage, and is partially or fully restored by crosslinking. The wear resistance of impacted articular cartilage was diminished compared to undamaged cartilage, suggesting that mechanical damage that is directly induced by the impact may contribute to the progression of PTOA. However, the decrease in wear resistance was completely reversed by the crosslinking treatments. Additionally, the crosslinking treatments improved the resistance to collagenase digestion at the impact-damaged articular surface. These results highlight the potential therapeutic value of collagen crosslinking via genipin in the prevention of cartilage degeneration after traumatic injury.
The Mechanotransduction of Hydrostatic Pressure by Mesenchymal Stem Cells
(2018-12) Hosseini, Seyedeh Ghazaleh; Wagner, Diane R.; Na, Sungsoo; Ji, Julie
Mesenchymal stem cells (MSCs) are responsive to mechanical stimuli that play an essential role in directing their diﬀerentiation to the chondrogenic lineage. A better understanding of the mechanisms that allow MSCs to respond to mechanical stimuli is important to improving cartilage tissue engineering and regenerative medicine. Hydrostatic pressure (HP) in particular is known to be a primary mechanical force in joints. However, little is known about the underlying mechanisms that facilitate HP mechanotransduction. Understanding the signaling pathways in MSCs in transducing HP to a beneﬁcial biologic response and their interrelationship were the focus of this thesis. Studies used porcine marrow-derived MSCs seeded in agarose gel. Calcium ion Ca++ signaling, focal adhesion kinase (FAK) involvement, and sirtuin1 activity were investigated in conjunction with HP application. Intracellular Ca++ concentration was previously shown to be changed with HP application. In our study a bioreactor was used to apply a single application of HP to the MSC-seeded gel structures and observe Ca++ signaling via live imaging of a ﬂuorescent calcium indicator in cells. However, no ﬂuctuations in Ca++ concentrations were observed with 10 minutes loading of HP. Additionally a problem with the biore actor design was discovered. First the gel was ﬂoating around in the bioreactor even without loading. After stabilizing the gel and stopping it from ﬂoating, there were still about 16 µm of movement and deformation in the system. The movement and deformation was analyzed for the gel structure and diﬀerent parts of the bioreactor. Furthermore, we investigated the role of FAK in early and late chondrogenesis and also its involvement in HP mechanotransduction. A FAK inhibitor was used on MSCs from day 1 to 21 and showed a dose-dependent suppression of chondrogenesis. However, when low doses of FAK inhibitor added to the MSC culture from day 21 to 42, chondrogenesis was not inhibited. With 4 hour cyclic HP, FAK phosphorylation increased. The beneﬁcial eﬀect of HP was suppressed with overnight addition of the FAK inhibitor to MSC medium, suggesting FAK involvement in HP mechanotransd ucation by MSCs. Moreover, sirtuin1 participation in MSC chondrogenesis and mechanotransduc tion was also explored. The results indicated that overnight sirtuin1 inhibition in creased chondrogenic gene expression (Agc, Col2, and Sox9) in MSCs. Additionally, the activity of sirtuin1 was decreased with both 4 hour cyclic hydrostatic pressure and inhibitor application. These two together demonstrated that sirtuin1 inhibition enhances chondrogenesis. In this research we have investigated the role of Ca++ signaling, FAK involvement, and sirtuin1 activity in the mechanotransduction of HP in MSCs. These understand ings about the mechanisms regulating the chondrogenesis with respect to HP could have important implications for cartilage tissue engineering and regenerative studies.
Mineral deposition and vascular invasion of hydroxyapatite reinforced collagen scaffolds seeded with human adipose-derived stem cells
(BMC, 2019-10-17) Weiss-Bilka, Holly E.; Meagher, Matthew J.; Gargac, Joshua A.; Niebur, Glen L.; Roeder, Ryan K.; Wagner, Diane R.; Mechanical Engineering and Energy, School of Engineering and Technology
Background: Collagen-based scaffolds reinforced with hydroxyapatite (HA) are an attractive choice for bone tissue engineering because their composition mimics that of bone. We previously reported the development of compression-molded collagen-HA scaffolds that exhibited high porosity, interconnected pores, and mechanical properties that were well-suited for surgical handling and fixation. The objective of this study was to investigate these novel collagen-HA scaffolds in combination with human adipose-derived stem cells (hASCs) as a template for bone formation in a subcutaneous athymic mouse model. Methods: Collagen-HA scaffolds and collagen-only scaffolds were fabricated as previously described, and a clinically approved bone void filler was used as a control for the material. Constructs were seeded with hASCs and were pre-treated with either control or osteogenic media. A cell-free group was also included. Scaffolds were implanted subcutaneously in the backs of athymic nude mice for 8 weeks. Mineral deposition was quantified via micro-computed tomography. Histological and immunofluorescence images of the explants were used to analyze their vascular invasion, remodeling and cellularity. Results: Cell-free collagen-HA scaffolds and those that were pre-seeded with osteogenically differentiated hASCs supported mineral deposition and vascular invasion at comparable rates, while cell-seeded constructs treated with the control medium showed lower mineralization after implantation. HA-reinforcement allowed collagen constructs to maintain their shape, provided improved cell-tissue-scaffold integration, and resulted in a more organized tissue when pre-treated in an osteogenic medium. Scaffold type and pre-treatment also determined osteoclast activity and therefore potential remodeling of the constructs. Conclusions: The results of this study cumulatively indicate that treatment medium and scaffold composition direct mineralization and angiogenic tissue formation in an ectopic model. The data suggest that it may be necessary to match the scaffold with a particular cell type and cell-specific pre-treatment to achieve optimal bone formation.
Scaffold-free bioprinting of mesenchymal stem cells using the Regenova printer: Spheroid characterization and osteogenic differentiation
(Elsevier, 2019-09) Aguilar, Izath Nizeet; Olivos, David J., III; Brinker, Alexander; Alvarez, Marta B.; Smith, Lester J.; Chu, Tien-Min Gabriel; Kacena, Melissa A.; Wagner, Diane R.; Orthopaedic Surgery, School of Medicine
Limitations in scaffold material properties, such as sub-optimal degradation time, highlight the need for alternative approaches to engineer de novo tissues. One emerging solution for fabricating tissue constructs is scaffold-free tissue engineering. To facilitate this approach, three-dimensional (3D) bioprinting technology (Regenova Bio 3D Printer) has been developed to construct complex geometric shapes from discrete cellular spheroids without exogenous scaffolds. Optimizing spheroid fabrication and characterizing cellular behavior in the spheroid environment are important first steps prior to printing larger constructs. Here, we characterized spheroids of immortalized mouse bone marrow stromal cells (BMSCs) that were differentiated to the osteogenic lineage. Immortalized BMSCs were seeded in low attachment 96-well plates in various numbers to generate self-aggregated spheroids either under the force of gravity or centrifugation. Cells were cultured in control or osteogenic media for up to 28 days. Spheroid diameter, roundness and smoothness were measured. Cell viability, DNA content and alkaline phosphatase activity were assessed at multiple time points. Additionally, expression of osteogenic markers was determined using real time qPCR. Spheroids formed under gravity with 20 K, 30 K and 40 K cells had average diameters of 498.5 ± 8.3 μm, 580.0 ± 32.9 μm and 639.2 ± 54.0 μm, respectively, while those formed under 300G centrifugation with the same numbers of cells had average diameters of 362.3 ± 3.5 μm, 433.1 ± 6.4 μm and 491.2 ± 8.0 μm. Spheroids formed via centrifugation were superior to those formed by gravity, as evidenced by better roundness and smoothness and double the retention of DNA (cellular) content. Cells in spheroids exhibited a robust osteogenic response to the differentiation medium, including higher mRNA expression of alkaline phosphatase, collagen type I, and osteocalcin than those cultured in control medium, as well as greater alkaline phosphatase activity. The optimal spheroid fabrication technique from this study was to aggregate 40 K cells under 150–300G centrifugation. In future investigations, these spheroids will be 3D printed into larger tissue constructs.
Scaffold-free bioprinting of mesenchymal stem cells with the regenova printer: Optimization of printing parameters
(Elsevier, 2019-03-23) Aguilar, Izath Nizeet; Smith, Lester J.; Olivos, David J.; Chu, Tien-Min Gabriel; Kacena, Melissa A.; Wagner, Diane R.; Radiology and Imaging Sciences, School of Medicine
The Kenzan bioprinting method provides a high-resolution biofabrication process by facilitating the fusion of submillimeter cell aggregates (spheroids) into larger tissue constructs on a needle array that is removed upon spheroid fusion. Although the method is relatively straightforward in principle, Kenzan method bioprinting relies on a complex 3D bioprinter (Regenova Bio 3D Printer, Cyfuse, K.K., Japan) implementing an advanced vision system to verify the microscopic spheroids’ geometry and high-precision mechatronics to aseptically manipulate the spheroids into position. Due to the complexity of the operation, the need for aseptic conditions, and the size of the spheroids, proficiency with the Regenova Bio 3D Printer and the Kenzan method requires development of best practices and troubleshooting techniques to ensure a robust print and minimize the use of resources. In addition, managing the construct post-bioprinting both in culture and for surgical implantation requires careful consideration and workflow design. Here, we describe methods for generating a competent tissue construct and optimizing the bioprinting process. Optimization resulted in a 4-fold reduction in print times, a 20-fold reduction in the use of bioprinting nozzles, and more robust constructs. The results and procedures described herein will have potential applications for tissue engineering, research, and clinical uses in the future.

Browsing by Author "Wagner, Diane R."

Results Per Page

Sort Options